NetApp CN1610 - No Aaa Authorization; Authorization Exec; No Authorization Exec

58 User Account Commands
The following shows an example of the command.
(CN1610) #
(CN1610) #configure
(CN1610) (Config)#aaa authorization exec default tacacs+ none
no aaa
authorization
This command deletes the authorization method list.
authorization exec This command applies a command authorization method list to an access method
so that the user may not be required to use the enable command to enter
Privileged EXEC mode. For usage scenarios on exec authorization, see the
command “aaa authorization” on page 57.
no authorization
exec
This command removes command authorization from a line config mode.
list-name Alphanumeric character string used to name the list
of authorization methods.
method
TACACS+/RADIUS/Local and none are supported.
Parameter Description
Format
no aaa authorization commands {default|list-name}
Mode Global Config
Format
authorization exec list-name
Mode Line console, Line telnet, Line SSH
Parameter Description
list-name The command authorization method list.
Format
no authorization exec
Mode Line console, Line telnet, Line SSH