Chapter 5: Switching Commands 395
no set gvrp
interfacemode
This command disables GVRP on a single port (Interface Config mode) or all
ports (Global Config mode). If GVRP is disabled, Join Time, Leave Time and
Leave All Time have no effect.
show gvrp
configuration
This command displays Generic Attributes Registration Protocol (GARP)
information for one or all interfaces.
Format
no set gvrp interfacemode
Mode ◆ Interface Config
◆ Global Config
Format
show gvrp configuration {slot/port | all}
Mode ◆ Privileged EXEC
◆ User EXEC
Term Definition
Interface slot/port
Join Timer The interval between the transmission of GARP
PDUs registering (or reregistering) membership for
an attribute. Current attributes are a VLAN or
multicast group. There is an instance of this timer on
a per-Port, per-GARP participant basis. Permissible
values are 10 to 100 centiseconds (0.1 to 1.0
seconds). The factory default is 20 centiseconds (0.2
seconds). The finest granularity of specification is
one centisecond (0.01 seconds).
To Next Page
Loading...
