NetApp CN1610 - Drop; Mirror; Redirect; Conform-Color

Chapter 7: Quality of Service Commands 629
drop This command specifies that all packets for the associated traffic stream are to be
dropped at ingress.
mirror This command specifies that all incoming packets for the associated traffic
stream are copied to a specific egress interface (physical port or LAG).
redirect This command specifies that all incoming packets for the associated traffic
stream are redirected to a specific egress interface (physical port or port-channel).
conform-color Use this command to enable color-aware traffic policing and define the conform-
color class map. Used in conjunction with the police command where the fields
for the conform level are specified. The
class-map-name parameter is the name
of an existing DiffServ class map.
Format
drop
Mode Policy-Class-Map Config
Incomp
atibilitie
s
Assign Queue, Mark (all forms), Mirror, Police, Redirect
Format
mirror slot/port
Mode Policy-Class-Map Config
Incomp
atibilitie
s
Drop, Redirect
Format
redirect slot/port
Mode Policy-Class-Map Config
Incomp
atibilitie
s
Drop, Mirror