NetApp CN1610 - Show Vlan Port

Chapter 5: Switching Commands 365
show vlan port This command displays VLAN port information.
Format
show vlan brief
Mode ◆ Privileged EXEC
◆ User EXEC
Term Definition
VLAN ID There is a VLAN Identifier (vlanid) associated with
each VLAN. The range of the VLAN ID is 1 to
4093.
VLAN Name A string associated with this VLAN as a
convenience. It can be up to 32 alphanumeric
characters long, including blanks. The default is
blank. VLAN ID 1 always has a name of “Default.”
This field is optional.
VLAN Type Type of VLAN, which can be Default (VLAN ID =
1) or static (one that is configured and permanently
defined), or a Dynamic (one that is created by GVRP
registration).
Format
show vlan port {slot/port | all}
Mode ◆ Privileged EXEC
◆ User EXEC
Term Definition
Interface slot/port It is possible to set the parameters for all
ports by using the selectors on the top line.
Port VLAN ID
Configured
The VLAN ID that this port will assign to untagged
frames or priority tagged frames received on this
port. The value must be for an existing VLAN. The
factory default is 1.