NetApp CN1610 - Debug Debug-Config

Chapter 4: Utility Commands 251
debug debug-config Use this command to download or upload the debug-config.ini file. The debug-
config. ini file executes CLI commands (including devshell and drivshell
commands) on specific predefined events. The debug config file is created
manually and downloaded to the switch.
crashlog-number Specifies the file number to view. The system
maintains up to four copies, and the valid range is 1–
4.”deb
upload url To upload the crash log (or crash dump) to a TFTP
server, use the
upload keyword and specify the
required TFTP server information.
proc View the application process crashlog.
verbose Enable the verbose crashlog.
deleteall Delete all crash log files on the system.
data Crash log data recorder.
crashdump-number Specifies the crash dump number to view. The valid
range is 0–2.
download url To download a crash dump to the switch, use the
download keyword and specify the required TFTP
server information.
component-id The ID of the component that caused the crash.
item-number The item number.
additional-parameter Additional parameters to include.
Parameter Description
Default disabled
Format
debug debug-config {download < url > | upload < url >}
Mode Privileged EXEC