NetApp CN1610 - Spanning-Tree Bpdufilter Default; No Spanning-Tree Bpdufilter Default; Spanning-Tree Bpduflood; No Spanning-Tree Bpduflood

Chapter 5: Switching Commands 321
spanning-tree
bpdufilter default
Use this command to enable BPDU Filter on all the edge port interfaces.
no spanning-tree
bpdufilter default
Use this command to disable BPDU Filter on all the edge port interfaces.
spanning-tree
bpduflood
Use this command to enable BPDU Flood on an interface or range of interfaces.
no spanning-tree
bpduflood
Use this command to disable BPDU Flood on the interface or range of interfaces.
spanning-tree
bpduguard
Use this command to enable BPDU Guard on the switch.
Default disabled
Format
spanning-tree bpdufilter default
Mode Global Config
Default disabled
Format
no spanning-tree bpdufilter default
Mode Global Config
Default disabled
Format
spanning-tree bpduflood
Mode Interface Config
Default disabled
Format
no spanning-tree bpduflood
Mode Interface Config
Default disabled
Format
spanning-tree bpduguard