NetApp CN1610 - Show Sflow Samplers

Chapter 4: Utility Commands 283
1 tulasi No Timeout 1400 6343
0.0.0.0 <= No Timeout string
2 0 1400 6343 0.0.0.0
3 0 1400 6343 0.0.0.0
4 0 1400 6343 0.0.0.0
5 0 1400 6343 0.0.0.0
6 0 1400 6343 0.0.0.0
7 0 1400 6343 0.0.0.0
8 0 1400 6343 0.0.0.0
(CN1610) #show sflow receivers 1
Receiver Index................................. 1
Owner String................................... tulasi
Time out....................................... No Timeout
<= No Timeout string is added
IP Address:.................................... 0.0.0.0
Address Type................................... 1
Port........................................... 6343
Datagram Version............................... 5
Maximum Datagram Size.......................... 1400
show sflow
samplers
Use this command to display the sFlow sampling instances created on the switch.
Format
show sflow samplers
Mode Privileged EXEC
Field Description
Sampler Data Source The sFlowDataSource (slot/port) for this sFlow
sampler. This agent will support Physical ports only.
Receiver Index The sFlowReceiver configured for this sFlow
sampler.
Packet Sampling Rate The statistical sampling rate for packet sampling
from this source.
Max Header Size The maximum number of bytes that should be
copied from a sampled packet to form a flow
sample.