NetApp CN1610 - Debug Exception; Show Exception

Chapter 4: Utility Commands 267
with the TFTP server and informs the user if the TFTP server can be contacted.
Similarly, if protocol is configured as
nfs , this command mounts and unmounts
the file system and informs the user of the status.
Note
write core reloads the switch which is useful when the device malfunctions, but
has not crashed.
For write core test , the destination file name is used for the TFTP test.
Optionally, you can specify the destination file name when the protocol is
configured as TFTP.
debug exception The command displays core dump features support.
show exception Use this command to display the configuration parameters for generating a core
dump file.
The following shows an example of this command.
(CN1610) #show exception
Coredump file name............................. core
Coredump filename uses hostname................ False
Coredump filename uses time-stamp.............. TRUE
Default None
Format
write core [test [ dest_file_name ]]
Mode Privileged EXEC
Default None
Format
debug exception
Mode Privileged EXEC
Default None
Format
show exception
Mode Privileged EXEC