630 DiffServ Policy Commands
This command may only be used after specifying a police command for the
policy-class instance.
class This command creates an instance of a class definition within the specified policy
for the purpose of defining treatment of the traffic class through subsequent
policy attribute statements. The
classname is the name of an existing DiffServ
class.
This command causes the specified policy to create a reference to the class
definition.
The CLI mode is changed to Policy-Class-Map Config when this command is
successfully executed.
no class This command deletes the instance of a particular class and its defined treatment
from the specified policy.
classname is the names of an existing DiffServ class.
This command removes the reference to the class definition for the specified
policy.
Format
conform-color
class-map-name
Mode Policy-Class-Map Config
Format
class
classname
Mode Policy-Map Config
Format
no class
classname
Mode Policy-Map Config
To Next Page
Loading...
