Chapter 4: Utility Commands 173
show process app-
list
This command displays the user and system applications.
falling threshold The percentage of CPU resources that, when usage
falls below this level for the configured interval,
triggers a notification. The range is 1 to 100. The
default is 0 (disabled).
A notification is triggered when the total CPU
utilization falls below this level for a configured
period of time. The falling utilization threshold
notification is made only if a rising threshold
notification was previously done. The falling
utilization threshold must always be equal or less
than the rising threshold value. The CLI does not
allow setting the falling threshold to be greater than
the rising threshold.
falling interval The duration of the CPU falling threshold, in
seconds, that must be met to trigger a notification.
The range is 5 to 86400. The default is 0 (disabled).
Parameter Description
Format
show process app-list
Mode Privileged EXEC
Parameter Description
ID The application identifier.
Name The name that identifies the process.
PID The number the software uses to identify the
process.
Admin Status The administrative status of the process.
Auto Restart Indicates whether the process will automatically
restart if it stops.
To Next Page
Loading...
