NetApp CN1610 - Show Process App-Resource-List

174 System Information and Statistics Commands
The following shows example CLI display output for the command.
Admin Auto Running
ID Name PID Status Restart Status
---- ---------------- ----- --------- --------- -------
1 dataplane 15309 Enabled Disabled Running
2 switchdrvr 15310 Enabled Disabled Running
3 syncdb 15314 Enabled Disabled Running
4 lighttpd 18718 Enabled Enabled Running
5 syncdb-test 0 Disabled Disabled Stopped
6 proctest 0 Disabled Enabled Stopped
7 user.start 0 Enabled Disabled Stopped
show process app-
resource-list
This command displays the configured and in-use resources of each application.
Running Status Indicates whether the process is currently running or
stopped.
Parameter Description
Format
show process app-resource-list
Mode Privileged EXEC
Parameter Description
ID The application identifier.
Name The name that identifies the process.
PID The number the software uses to identify the
process.
Memory Limit The maximum amount of memory the process can
consume.
CPU Share The maximum percentage of CPU utilization the
process can consume.
Memory Usage The amount of memory the process is currently
using.