Chapter 5: Switching Commands 353
no vlan ingressfilter This command disables ingress filtering. If ingress filtering is disabled, frames
received with VLAN IDs that do not match the VLAN membership of the
receiving interface are admitted and forwarded to ports that are members of that
VLAN.
vlan makestatic This command changes a dynamically created VLAN (created by GVRP
registration) to a static VLAN (one that is permanently configured and defined).
The ID is a valid VLAN identification number. VLAN range is 2-4093.
vlan name This command changes the name of a VLAN. The name is an alphanumeric
string of up to 32 characters, and the ID is a valid VLAN identification number.
ID range is 1-4093.
no vlan name This command sets the name of a VLAN to a blank string.
vlan participation This command configures the degree of participation for a specific interface or
range of interfaces in a VLAN. The ID is a valid VLAN identification number,
and the interface is a valid interface number
.
Format
no vlan ingressfilter
Mode Interface Config
Format
vlan makestatic
2-4093
Mode VLAN Config
Default ◆ VLAN ID 1 - default
◆ other VLANS - blank string
Format
vlan name
1-4093 name
Mode VLAN Config
Format
no vlan name
1-4093
Mode VLAN Config
To Next Page
Loading...
