Chapter 4: Utility Commands 233
The following shows examples of the command.
(CN1610) (Config)# clock summer-time recurring 2 sun nov 3:18 2 mon
nov 3:18
(CN1610) (Config)# clock summer-time recurring 2 sun nov 3:18 2 mon
nov 3:18 offset 120 zone INDA
no clock summer-
time
This command disables the summer-time settings.
The following shows an example of the command.
(CN1610) (Config)# no clock summer-time
USA The system clock uses the standard recurring
daylight saving time settings used in the United
States.
week Week of the month. The range is 1 to 5, first, last.)
day Day of the week. The range is the first three letters
by name; sun, for example.
month Month. The range is the first three letters by name;
jan, for example.
hh:mm Time in 24-hour format in hours and minutes. The
range is hours: 0 to 23, minutes: 0 to 59.
offset The number of minutes to add during the
summertime. The range is 1 to 1440.
acronym The acronym for the summertime to be displayed
when summertime is in effect. Up to four characters
are allowed.
Parameter Description
Format no clock summer-time
Mode Global Config
To Next Page
Loading...
