NetApp CN1610 - Clock Summer-Time Recurring

232 Time Zone Commands
The following shows examples of the command.
(CN1610) (Config)# clock summer-time date 1 nov 2011 3:18 2 nov
2011 3:18
(CN1610) (Config)# clock summer-time date 1 nov 2011 3:18 2 nov
2011 3:18 offset 120 zone INDA
clock summer-time
recurring
This command sets the summer-time recurring parameters.
Parameter Description
date Day of the month. Range is 1 to 31.
month Month. Range is the first three letters by name; jan,
for example.
year Year. The range is 2000 to 2097.
hh:mm Time in 24-hour format in hours and minutes. The
range is hours: 0 to 23, minutes: 0 to 59.
offset The number of minutes to add during the
summertime. The range is 1 to 1440.
acronym The acronym for the summer-time to be displayed
when summertime is in effect. The range is up to
four characters are allowed.
Format clock summer-time recurring {week day month hh:mm week day
month hh:mm} [offset offset] [zone acronym]
Mode Global Config
Parameter Description
EU The system clock uses the standard recurring
summer time settings used in countries in the
European Union.