Chapter 4: Utility Commands 269
show mbuf Use this command to display the memory buffer (MBUF) Utilization Monitoring
parameters.
Mode Global Config
Field Description
Rising Threshold The percentage of the memory buffer resources that,
when exceeded for the configured rising interval,
triggers a notification. The range is 1 to 100. The
default is 0 (disabled).
Falling Threshold The percentage of memory buffer resources that,
when usage falls below this level for the configured
interval, triggers a notification. The range is 1 to
100. The default is 0 (disabled).
Severity The severity level at which Mbuf logs messages. The
range is 1 to 7. The default is 5
(L7_LOG_SEVERITY_NOTICE).
Format
show mbuf
Mode Privileged EXEC
Field Description
Rising Threshold The percentage of the memory buffer resources that,
when exceeded for the configured rising interval,
triggers a notification. The range is 1 to 100. The
default is 0 (disabled).
Falling Threshold The percentage of memory buffer resources that,
when usage falls below this level for the configured
interval, triggers a notification. The range is 1 to
100. The default is 0 (disabled).
Severity The severity level.
To Next Page
Loading...
