602 IPv6 Management Commands
interface or VLAN routing interface. The keyword vlan is used to specify the
VLAN ID of the routing VLAN directly instead of a slot/port format. Use the
optional
size keyword to specify the size of the ping packet.
You can utilize the ping or traceroute facilities over the service/network ports
when using an IPv6 global address
ipv6-global-address|hostname. Any
IPv6 global address or gateway assignments to these interfaces will cause IPv6
routes to be installed within the IP stack such that the ping or traceroute request is
routed out the service/network port properly. When referencing an IPv6 link-
local address, you must also specify the service or network port interface by
using the
serviceport or network parameter.
ping ipv6 interface Use this command to determine whether another computer is on the network. To
use the command, configure the switch for network (in-band) connection. The
source and target devices must have the ping utility enabled and running on top of
TCP/IP. The switch can be pinged from any IP workstation with which the switch
is connected through the default VLAN (VLAN 1), as long as there is a physical
path between the switch and the workstation. The terminal interface sends three
pings to the target station. You can use a network port, service port, vlan, or
physical interface as the source. The argument slot/port corresponds to a physical
routing interface or VLAN routing interface. The keyword vlan is used to specify
the VLAN ID of the routing VLAN directly instead of in a slot/port format.
Default
◆ The default count is 1.
◆ The default interval is 3 seconds.
◆ The default size is 0 bytes.
Format
ping ipv6
{
ipv6-global-address|hostname |
{interface {slot/port
|vlan 1-4093
| serviceport |
network}
link-local-address
} [size
datagram-size]
}
Mode ◆ Privileged EXEC
◆ User EXEC
Format
ping ipv6
interface
{slot/port|vlan
1-4093
|network
|serviceport} {link-local-address
link-local-address
|
ipv6-address
} [size
datagram-size
]
Modes ◆ Privileged EXEC
◆ User EXEC
To Next Page
Loading...
