NetApp CN1610 - Show Radius Accounting

118 RADIUS Commands
RADIUS Accounting Mode................. Disable
RADIUS Attribute 4 Mode................ Enable
RADIUS Attribute 4 Value .............. 192.168.37.60
(CN1610) #show radius servers 192.168.37.58
Server Name............................ Default_RADIUS_Server
Host Address........................... 192.168.37.58
Secret Configured...................... No
Message Authenticator ................. Enable
Number of Retransmits.................. 4
Time Duration.......................... 10
RADIUS Accounting Mode................. Disable
RADIUS Attribute 4 Mode................ Enable
RADIUS Attribute 4 Value .............. 192.168.37.60
show radius
accounting
This command displays a summary of configured RADIUS accounting servers.
If you do not specify any parameters, then only the accounting mode and the
RADIUS accounting server details are displayed.
Format
show radius accounting name [ servername ]
Mode Privileged EXEC
Field Description
servername An alias name to identify the server.
RADIUS Accounting
Mode
A global parameter to indicate whether the
accounting mode for all the servers is enabled or not.
Term Definition
Host Address The IP address of the host.
Server Name The name of the accounting server.
Port The port used for communication with the
accounting server.