NetApp CN1610 - Dos-Control Tcpoffset; No Dos-Control Tcpoffset; Dos-Control Tcpsyn; No Dos-Control Tcpsyn

572 Denial of Service Commands
dos-control
tcpoffset
This command enables TCP Offset Denial of Service protection. If the mode is
enabled, Denial of Service prevention is active for this type of attack. If packets
ingress having TCP Header Offset equal to one (1), the packets will be dropped if
the mode is enabled.
no dos-control
tcpoffset
This command disabled TCP Offset Denial of Service protection.
dos-control tcpsyn This command enables TCP SYN and L4 source = 0-1023 Denial of Service
protection. If the mode is enabled, Denial of Service prevention is active for this
type of attack. If packets ingress having TCP flag SYN set and an L4 source port
from 0 to 1023, the packets will be dropped if the mode is enabled.
no dos-control
tcpsyn
This command sets disables TCP SYN and L4 source = 0-1023 Denial of Service
protection.
Default disabled
Format
dos-control tcpoffset
Mode Global Config
Format
no dos-control tcpoffset
Mode Global Config
Default disabled
Format
dos-control tcpsyn
Mode Global Config
Format
no dos-control tcpsyn
Mode Global Config