NetApp CN1610 - Clear Ip Dhcp Snooping Binding; Clear Ip Dhcp Snooping Statistics; Show Ip Verify Source

496 DHCP Snooping Configuration Commands
clear ip dhcp
snooping binding
Use this command to clear all DHCP Snooping bindings on all interfaces or on a
specific interface.
clear ip dhcp
snooping statistics
Use this command to clear all DHCP Snooping statistics.
show ip verify
source
Use this command to display the IPSG configurations on all ports.
Format
clear ip dhcp snooping binding [interface slot/port]
Mode ◆ Privileged EXEC
◆ User EXEC
Format
clear ip dhcp snooping statistics
Mode ◆ Privileged EXEC
◆ User EXEC
Format
show ip verify source
Mode ◆ Privileged EXEC
◆ User EXEC
Term Definition
Interface Interface address in slot/port format.
Filter Type Is one of two values:
◆ ip-mac: User has configured MAC address
filtering on this interface.
◆ ip: Only IP address filtering on this interface.
IP Address IP address of the interface
MAC Address If MAC address filtering is not configured on the
interface, the MAC Address field is empty. If port
security is disabled on the interface, then the MAC
Address field displays “permit-all.”