Chapter 5: Switching Commands 357
vlan port tagging all This command configures the tagging behavior for all interfaces in a VLAN to
enabled. If tagging is enabled, traffic is transmitted as tagged frames. If tagging is
disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN
identification number.
no vlan port tagging
all
This command configures the tagging behavior for all interfaces in a VLAN to
disabled. If tagging is disabled, traffic is transmitted as untagged frames. The ID
is a valid VLAN identification number.
vlan protocol group This command adds protocol-based VLAN groups to the system. The
groupid
is a unique number from 1–128 that is used to identify the group in subsequent
commands.
vlan protocol group
name
This command assigns a name to a protocol-based VLAN groups. The
groupname variable can be a character string of 0 to 16 characters.
Mode Global Config
Format
vlan port tagging all
1-4093
Mode Global Config
Format
no vlan port tagging all
Mode Global Config
Format
vlan protocol group
groupid
Mode Global Config
Format
vlan protocol group name
groupid groupname
Mode Global Config
To Next Page
Loading...
