Chapter 7: Quality of Service Commands 615
show interfaces
random-detect
This command displays the global WRED settings for each CoS queue. If you
specify the slot/port, the command displays the WRED settings for each CoS
queue on the specified interface.
Format
show interfaces random-detect [slot/port]
Mode Privileged EXEC
Term Definition
Queue ID An interface supports n queues numbered 0 to (n-1).
WRED Minimum
Threshold
The configured minimum threshold the queue depth
(as a percentage) where WRED starts marking and
dropping traffic.
WRED Maximum
Threshold
The configured maximum threshold is the queue
depth (as a percentage) above which WRED marks /
drops all traffic.
WRED Drop
Probability
The configured percentage probability that WRED
will mark/drop a packet, when the queue depth is at
the maximum threshold. (The drop probability
increases linearly from 0 just before the minimum
threshold, to this value at the maximum threshold,
then goes to 100% for larger queue depths).
To Next Page
Loading...
