614 Class of Service Commands
If you specify the interface, the command also displays the following
information.
Term Definition
Interface Shaping
Rate
The global interface shaping rate value.
WRED Decay
Exponent
The global WRED decay exponent value.
Queue Id An interface supports n queues numbered 0 to (n-1).
Minimum Bandwidth The minimum transmission bandwidth guarantee for
the queue, expressed as a percentage. A value of 0
means bandwidth is not guaranteed and the queue
operates using best-effort. This is a configured
value.
Scheduler Type Indicates whether this queue is scheduled for
transmission using a strict priority or a weighted
scheme. This is a configured value.
Queue Management
Type
The queue depth management technique used for
this queue (tail drop).
Term Definition
Interface The slot/port of the interface. If displaying the
global configuration, this output line is replaced with
a Global Config indication.
Interface Shaping
Rate
The maximum transmission bandwidth limit for the
interface as a whole. It is independent of any per-
queue maximum bandwidth value(s) in effect for the
interface. This is a configured value.
WRED Decay
Exponent
The configured WRED decay exponent for a CoS
queue interface.
To Next Page
Loading...
