NetApp CN1610 - No Set Mld; Set Mld Interfacemode; No Set Mld Interfacemode

Chapter 5: Switching Commands 525
no set mld Use this command to disable MLD Snooping on the system.
set mld
interfacemode
Use this command to enable MLD Snooping on all interfaces. If an interface has
MLD Snooping enabled and you enable this interface for routing or enlist it as a
member of a port-channel (LAG), MLD Snooping functionality is disabled on
that interface. MLD Snooping functionality is re-enabled if you disable routing
or remove port-channel (LAG) membership from an interface that has MLD
Snooping enabled.
no set mld
interfacemode
Use this command to disable MLD Snooping on all interfaces.
Mode
◆ Global Config
◆ Interface Config
◆ VLAN Mode
Format
set mld vlanid
Mode ◆ Global Config
◆ Interface Config
◆ VLAN Mode
Default disabled
Format
set mld interfacemode
Mode Global Config
Format
no set mld interfacemode
Mode Global Config