NetApp CN1610 - Show Snmp User; Show Snmp Views

Chapter 3: Management Commands 105
The following shows example CLI display output for the command.
(CN1610)# show snmp source-interface
SNMP trap Client Source Interface.............. (not configured)
show snmp user This command displays the currently configured SNMPv3 users.
show snmp views This command displays the currently configured views.
Mode Privileged EXEC
Format
show snmp user [username]
Mode Privileged EXEC
Term Definition
Name The name of the user.
Group Name The group that defines the SNMPv3 access
parameters.
Auth Method The authentication algorithm configured for this
user.
Privilege Method The encryption algorithm configured for this user.
Remote Engine ID The engineID for the user defined on the client
machine.
Format
show snmp views [viewname]
Mode Privileged EXEC
Parameter Description
Name The view name for this entry.