Chapter 5: Switching Commands 459
port-channel min-
links
This command configures the port-channel’s minimum links for lag interfaces.
port-channel name This command defines a name for the port-channel (LAG). The interface is a
logical slot/port for a configured port-channel, and
name is an alphanumeric
string up to 15 characters.
port-channel
system priority
Use this command to configure port-channel system priority. The valid range of
priority
is 0-65535.
Mode Interface Config
Global Config
Term Definition
slot/port| all Global Config Mode only: The interface is a logical
slot/port number of a configured port-channel. All
applies the command to all currently configured
port-channels.
Default
1
Format
port-channel min-links
1-8
Mode Interface Config
Format
port-channel name {
logical
slot/port}
name
Mode Global Config
Default 0x8000
Format
port-channel system priority
priority
Mode Global Config
To Next Page
Loading...
