NetApp CN1610 - Show Running-Config

Chapter 4: Utility Commands 177
The following shows example CLI display output for the command.
(CN1610) #show process proc-list
Process Application VM Size VM Peak
PID Name ID-Name Chld (KB) (KB) FD
Count
---- ---------------- -------------------- ---- -------- -------- -
15260 procmgr 0-procmgr No 1984 1984 8
15309 dataplane 1-dataplane No 293556 293560 11
15310 switchdrvr 2-switchdrvr No 177220 177408 57
15314 syncdb 3-syncdb No 2060 2080 8
show running-
config
Use this command to display or capture the current setting of different protocol
packages supported on the switch. This command displays or captures
commands with settings and configurations that differ from the default value. To
display or capture the commands with settings and configurations that are equal
to the default value, include the
all option.
Note
Show running-config does not display the User Password, even if you set one
different from the default.
Parameter Description
PID The number the software uses to identify the
process.
Process Name The name that identifies the process.
Application ID-Name The application identifier and its associated name.
Child Indicates whether the process has spawned a child
process.
VM Size Virtual memory size.
VM Peak The maximum amount of virtual memory the
process has used at a given time.
FD Count The file descriptors count for the process.