NetApp CN1610 - Show Authentication Methods

Chapter 5: Switching Commands 415
Configured method priority..................... undefined undefined
undefined
Enabled method priority........................ undefined undefined
undefined
Number of authenticated clients................ 0
Interface...................................... 1/0/3
Authentication Restart timer................... 300
Configured method order........................ dot1x mab captive-
portal
Enabled method order........................... dot1x mab undefined
Configured method priority..................... undefined undefined
undefined
Enabled method priority........................ undefined undefined
undefined
Number of authenticated clients................ 0
Interface...................................... 1/0/4
Authentication Restart timer................... 300
Configured method order........................ dot1x mab captive-
portal
Enabled method order........................... dot1x mab undefined
Configured method priority..................... undefined undefined
undefined
Enabled method priority........................ undefined undefined
undefined
Number of authenticated clients................ 0
show
authentication
methods
Use this command to display information about the authentication methods.
Format
show authentication methods
Mode Privileged EXEC
Term Definition
Authentication Login
List
The authentication login listname.
Method 1 The first method in the specified authentication
login list, if any.
Method 2 The second method in the specified authentication
login list, if any.