NetApp CN1610 - Clear Dot1 X Authentication-History; Clear Radius Statistics; Dot1 X Eapolflood; No Dot1 X Eapolflood;Dot1 X Dynamic-Vlan Enable

402 Port-Based Network Access Control Commands
clear dot1x
authentication-
history
This command clears the authentication history table captured during successful
and unsuccessful authentication on all interface or the specified interface.
clear radius
statistics
This command is used to clear all RADIUS statistics.
dot1x eapolflood Use this command to enable EAPOL flood support on the switch.
no dot1x eapolflood This command disables EAPOL flooding on the switch.
dot1x dynamic-vlan
enable
Use this command to enable the switch to create VLANs dynamically when a
RADIUS-assigned VLAN does not exist in the switch.
Format
clear dot1x authentication-history [slot/port]
Mode Privileged EXEC
Format
clear radius statistics
Mode Privileged EXEC
Default disabled
Format
dot1x eapolflood
Mode Global Config
Format
no dot1x eapolflood
Mode Global Config
Default Disabled
Format
dot1x dynamic-vlan enable
Mode Global Config