Chapter 7: Quality of Service Commands 635
The CLI mode is changed to Policy-Map Config when this command is
successfully executed.
no policy-map This command eliminates an existing DiffServ policy. The policyname
parameter is the name of an existing DiffServ policy. This command may be
issued at any time. If the policy is currently referenced by one or more interface
service attachments, this delete attempt fails.
policy-map rename This command changes the name of a DiffServ policy. The
policyname is the
name of an existing DiffServ class. The
newpolicyname parameter is a case-
sensitive alphanumeric string from 1 to 31 characters uniquely identifying the
policy.
Format
policy-map
policyname
{in|out}
Mode Global Config
Format
no policy-map
policyname
Mode Global Config
Format
policy-map rename
policyname newpolicyname
Mode Global Config
To Next Page
Loading...
