Chapter 5: Switching Commands 457
no port-channel
adminmode
This command disables all configured port-channels with the same
administrative mode setting.
port-channel
linktrap
This command enables link trap notifications for the port-channel (LAG). The
interface is a logical slot/port for a configured port-channel. The option
all sets
every configured port-channel with the same administrative mode setting.
no port-channel
linktrap
This command disables link trap notifications for the port-channel (LAG). The
interface is a logical slot and port for a configured port-channel. The option
all
sets every configured port-channel with the same administrative mode setting.
port-channel load-
balance
This command selects the load-balancing option used on a port-channel (LAG).
Traffic is balanced on a port-channel (LAG) by selecting one of the links in the
channel over which to transmit specific packets. The link is selected by creating a
binary pattern from selected fields in a packet, and associating that pattern with a
particular link.
Load-balancing is not supported on every device. The range of options for load-
balancing may vary per device.
Mode Global Config
Format
no port-channel adminmode all
Mode Global Config
Default enabled
Format
port-channel linktrap {
logical
slot/port | all}
Mode Global Config
Format
no port-channel linktrap {
logical
slot/port | all}
Mode Global Config
To Next Page
Loading...
