NetApp CN1610 - Show Ip Dhcp Snooping Database

Chapter 5: Switching Commands 493
The following shows example CLI display output for the command.
(CN1610) #show ip dhcp snooping binding
Total number of bindings: 2
MAC Address IP Address VLAN Interface Type Lease time
(Secs)
------------------ ------------ ---- --------- ---- -----------
-------
00:02:B3:06:60:80 210.1.1.3 10 0/1 86400
00:0F:FE:00:13:04 210.1.1.4 10 0/1 86400
show ip dhcp
snooping database
Use this command to display the DHCP Snooping configuration related to the
database persistency.
Term Definition
MAC Address Displays the MAC address for the binding that was
added. The MAC address is the key to the binding
database.
IP Address Displays the valid IP address for the binding rule.
VLAN The VLAN for the binding rule.
Interface The interface to add a binding into the DHCP
snooping interface.
Type Binding type; statically configured from the CLI or
dynamically learned.
Lease (sec) The remaining lease time for the entry.
Format
show ip dhcp snooping database
Mode ◆ Privileged EXEC
◆ User EXEC
Term Definition
Agent URL Bindings database agent URL.