NetApp CN1610 - No Set Gmrp Interfacemode; Show Gmrp Configuration

398 GMRP Commands
no set gmrp
interfacemode
This command disables GARP Multicast Registration Protocol on a single
interface or all interfaces. If an interface which has GARP enabled is enabled for
routing or is enlisted as a member of a port-channel (LAG), GARP functionality
is disabled. GARP functionality is subsequently re-enabled if routing is disabled
and port-channel (LAG) membership is removed from an interface that has
GARP enabled.
show gmrp
configuration
This command displays Generic Attributes Registration Protocol (GARP)
information for one or all interfaces.
Default disabled
Format
set gmrp interfacemode
Mode ◆ Interface Config
◆ Global Config
Format
no set gmrp interfacemode
Mode ◆ Interface Config
◆ Global Config
Format
show gmrp configuration {slot/port | all}
Mode ◆ Privileged EXEC
◆ User EXEC
Term Definition
Interface The slot/port of the interface that this row in the
table describes.