NetApp CN1610 - Show Ip Dhcp Snooping Interfaces; Show Ip Dhcp Snooping Statistics

494 DHCP Snooping Configuration Commands
The following shows example CLI display output for the command.
(CN1610) #show ip dhcp snooping database
agent url: /10.131.13.79:/sai1.txt
write-delay: 5000
show ip dhcp
snooping interfaces
Use this command to show the DHCP Snooping status of the interfaces.
The following shows example CLI display output for the command.
(CN1610) #show ip dhcp snooping interfaces
Interface Trust State Rate LimitBurst Interval
(pps) (seconds)
----------- ---------- ---------- --------------
1/g1No151
1/g2No151
1/g3No151
(CN1610) #show ip dhcp snooping interfaces ethernet 1/g15
Interface Trust State Rate LimitBurst Interval
(pps) (seconds)
----------- ---------- ---------- --------------
1/g15Yes151
show ip dhcp
snooping statistics
Use this command to list statistics for DHCP Snooping security violations on
untrusted ports.
Write Delay The maximum write time to write the database into
local or remote.
Term Definition
Format
show ip dhcp snooping interfaces
Mode Privileged EXEC
Format
show ip dhcp snooping statistics