NetApp CN1610 - Show Exception Log; Logging Persistent; No Logging Persistent; Mbuf

268 Serviceability Packet Tracing Commands
TFTP server IP.................................
FTP server IP..................................
FTP user name..................................
FTP password...................................
File path...................................... ./.
Protocol....................................... none
Switch-chip-register........................... False
Compression mode............................... TRUE
show exception log This command displays core dump traces on the local file system.
logging persistent Use this command to configure the Persistent logging for the switch. The severity
level of logging messages is specified at severity level. Possible values for
severity level are (emergency|0, alert|1, critical|2, error|3, warning|4, notice|5,
info|6, debug|7).
no logging
persistent
Use this command to disable the persistent logging in the switch.
mbuf Use this command to configure memory buffer (MBUF) threshold limits and
generate notifications when MBUF limits have been reached.
Default None
Format
show exception log [previous]
Mode Privileged EXEC, Config Mode
Default Disable
Format
logging persistent severity level
Mode Global Config
Format
no logging persistent
Mode Global Config
Format
mbuf {falling-threshold | rising threshold | severity}