NetApp CN1610 - Show Dhcp L2 Relay Stats Interface; Show Dhcp L2 Relay Agent-Option Vlan

482 DHCP L2 Relay Agent Commands
show dhcp l2relay
stats interface
This command displays statistics specific to DHCP L2 Relay configured
interface.
The following shows example CLI display output for the command.
(Broadcom FASTPATH Switching) #show dhcp l2relay stats interface
all
DHCP L2 Relay is Enabled.
Interface UntrustedServer UntrustedClient TrustedServer
TrustedClient
MsgsWithOpt82 MsgsWithOpt82 MsgsWithoutOpt82
MsgsWithoutOpt82
--------- --------------- ----------------- ----------------- ---
-----------
0/1 0 0 0 0
0/2 0 0 3 7
0/3 0 0 0 0
0/4 0 12 0 0
0/5 0 0 0 0
0/6 3 0 0 0
0/7 0 0 0 0
0/8 0 0 0 0
0/9 0 0 0 0
show dhcp l2relay
agent-option vlan
This command displays the DHCP L2 Relay Option-82 configuration specific to
VLAN.
Parameter Description
vlan-list Enter VLAN IDs in the range 1–4093. Use a dash (–
) to specify a range or a comma (,) to separate
VLAN IDs in a list. Spaces and zeros are not
permitted.
Format
show dhcp l2relay stats interface {all | interface-
num
}
Mode Privileged EXEC