NetApp CN1610 - Show Mail-Server Config

Chapter 4: Utility Commands 209
show mail-server
config
This command displays information about the email alert configuration.
Format
show mail-server {ip-address | hostname | all} config
Mode Privileged EXEC
Term Definition
No of mail servers
configured
The number of SMTP servers configured on the
switch.
Email Alert Mail
Server Address
The IPv4/IPv6 address or DNS hostname of the
configured SMTP server.
Email Alert Mail
Server Port
The TCP port the switch uses to send email to the
SMTP server
Email Alert Security
Protocol
The security protocol (TLS or none) the switch uses
to authenticate with the SMTP server.
Email Alert Username The username the switch uses to authenticate with
the SMTP server.
Email Alert Password The password the switch uses to authenticate with
the SMTP server.