528 MLD Snooping Commands
set mld
mcrtexpiretime
Use this command to set the Multicast Router Present Expiration time. The time
is set for the system, on a particular interface or VLAN. This is the amount of
time in seconds that a switch waits for a query to be received on an interface
before the interface is removed from the list of interfaces with multicast routers
attached. The range is 0 to 3600 seconds. A value of 0 indicates an infinite
timeout, i.e. no expiration.
no set mld
mcrtexpiretime
Use this command to set the Multicast Router Present Expiration time to 0. The
time is set for the system, on a particular interface or a VLAN.
set mld mrouter Use this command to configure the VLAN ID for the VLAN that has the
multicast router attached mode enabled.
no set mld mrouter Use this command to disable multicast router attached mode for a VLAN with a
particular VLAN ID.
Mode
◆ Global Config
◆ Interface Config
◆ VLAN Mode
Default 0
Format
set mld mcrtexpiretime
vlanid 0-3600
Mode ◆ Global Config
◆ Interface Config
Format
no set mld mcrtexpiretime
vlanid
Mode ◆ Global Config
◆ Interface Config
Format
set mld mrouter
vlanid
Mode Interface Config
To Next Page
Loading...
