186 System Information and Statistics Commands
show terminal
length
Use this command to display all the configured terminal length values.
The following shows example CLI display output for the command.
(CN1610) #show terminal length
Terminal Length:
----------------------
For Current Session………………….. 24
For Serial Console…………………… 24
For Telnet Sessions…………………... 24
For SSH Sessions…………………….. 24
memory free low-
watermark
processor
Use this command to get notifications when the CPU free memory falls below
the configured threshold. A notification is generated when the free memory falls
below the threshold. Another notification is generated once the available free
memory rises to 10 percent above the specified threshold. To prevent generation
of excessive notifications when the CPU free memory fluctuates around the
configured threshold, only one Rising or Falling memory notification is
generated over a period of 60 seconds. The threshold is specified in kilobytes.
The CPU free memory threshold configuration is saved across a switch reboot.
Format
show terminal length
Mode Privileged EXEC
Format
memory free low-watermark processor 1-515916
Mode Global Config
Parameter Description
low-watermark When CPU free memory falls below this threshold, a
notification message is triggered. The range is 1 to
the maximum available memory on the switch. The
default is 0 (disabled).
To Next Page
Loading...
