NetApp CN1610 - No Set Igmp Mcrtrexpiretime; Set Igmp Mrouter; No Set Igmp Mrouter; Set Igmp Mrouter Interface

Chapter 5: Switching Commands 513
no set igmp
mcrtrexpiretime
This command sets the Multicast Router Present Expiration time to 0. The time is
set for the system, on a particular interface or a VLAN.
set igmp mrouter This command configures the VLAN ID (
vlan_id) that has the multicast router
mode enabled.
no set igmp mrouter This command disables multicast router mode for a particular VLAN ID
(
vlan_id).
set igmp mrouter
interface
This command configures the interface or range of interfaces as a multicast
router interface. When configured as a multicast router interface, the interface is
treated as a multicast router interface in all VLANs.
Format
no set igmp mcrtrexpiretime [ vlan_id ]
Mode ◆ Global Config
◆ Interface Config
◆ VLAN Config
Format
no set igmp mcrtrexpiretime vlan_id
Mode VLAN Config
Format
set igmp mrouter vlan_id
Mode Interface Config
Format
no set igmp mrouter vlan_id
Mode Interface Config
Default disabled
Format
set igmp mrouter interface
Mode Interface Config