NetApp CN1610 - Show Rmon Statistics Interfaces

300 Remote Monitoring Commands
The following shows example CLI display output for the command.
(CN1610) #show rmon log 1
Maximum table size: 10
Event Description Time
------------------------------------------------
show rmon
statistics interfaces
This command displays the RMON statistics for the given interfaces.
Format
show rmon statistics interfaces slot/port
Mode Privileged EXEC
Parameter Description
Port slot/port
Dropped Total number of dropped events on the interface.
Octets Total number of octets received on the interface.
Packets Total number of packets received (including error
packets) on the interface.
Broadcast Total number of good broadcast packets received on
the interface.
Multicast Total number of good multicast packets received on
the interface.
CRC Align Errors Total number of packets received have a length
(excluding framing bits, including FCS octets) of
between 64 and 1518 octets inclusive.
Collisions Total number of collisions on the interface.
Undersize Pkts Total number of undersize packets. Packets are less
than 64 octets long (excluding framing bits,
including FCS octets).