Chapter 3: Management Commands 45
show telnet This command displays the current outbound Telnet settings. In other words,
these settings apply to Telnet connections initiated from the switch to a remote
system.
show telnetcon This command displays the current inbound Telnet settings. In other words, these
settings apply to Telnet connections initiated from a remote system to the switch.
Format
show telnet
Modes ◆ Privileged EXEC
◆ User EXEC
Term Definition
Outbound Telnet
Login Timeout
The number of minutes an outbound Telnet session
is allowed to remain inactive before being logged
off.
Maximum Number of
Outbound Telnet
Sessions
The number of simultaneous outbound Telnet
connections allowed.
Allow New Outbound
Telnet Sessions
Indicates whether outbound Telnet sessions will be
allowed.
Format
show telnetcon
Modes ◆ Privileged EXEC
◆ User EXEC
Term Definition
Remote Connection
Login Timeout
(minutes)
This object indicates the number of minutes a
remote connection session is allowed to remain
inactive before being logged off. May be specified as
a number from 1 to 160. The factory default is 5.
Maximum Number of
Remote Connection
Sessions
This object indicates the number of simultaneous
remote connection sessions allowed. The factory
default is 5.
To Next Page
Loading...
