46 Telnet Commands
The following output shows an example of the command:
(CN1610) #show telnetcon
Remote Connection Login Timeout (minutes)...... 5
Maximum Number of Remote Connection Sessions... 5
Allow New Telnet Sessions...................... Yes
Telnet Server Admin Mode....................... Enable
Telnet Server Port............................. 23
Allow New Telnet
Sessions
New Telnet sessions will not be allowed when this
field is set to no. The factory default value is yes.
Telnet Server Admin
Mode
The administrative mode of the telnet server.
Telnet Server Port The TCP port number where the telnet server is
listening.
Term Definition
To Next Page
Loading...
