Chapter 4: Utility Commands 285
The following shows an example of the command.
(CN1610) (Config)# rmon alarm 1 ifInErrors.2 30 absolute rising-
threshold 100 1 falling-threshold 10 2 startup rising owner myOwner
no rmon alarm This command deletes the RMON alarm entry.
The following shows an example of the command.
(CN1610) (Config)# no rmon alarm 1
Alarm Absolute Value The value of the statistic during the last sampling
period. This object is a read-only, 32-bit signed
value.
Alarm Rising
Threshold
The rising threshold for the sample statistics. The
range is 2147483648 to 2147483647. The default is
1.
Alarm Rising Event
Index
The index of the eventEntry that is used when a
rising threshold is crossed. The range is 1 to 65535.
The default is 1.
Alarm Falling
Threshold
The falling threshold for the sample statistics. The
range is 2147483648 to 2147483647. The default is
1.
Alarm Falling Event
Index
The index of the eventEntry that is used when a
falling threshold is crossed. The range is 1 to 65535.
The default is 2.
Alarm Startup Alarm The alarm that may be sent. Possible values are
rising, falling or both rising-falling. The default is
rising-falling.
Alarm Owner The owner string associated with the alarm entry.
The default is monitorAlarm.
Parameter Description
Format
no rmon alarm alarm number
Mode Global Config
To Next Page
Loading...
