NetApp CN1610 - No Lldp Transmit-Tlv; Lldp Transmit-Mgmt; No Lldp Transmit-Mgmt; Lldp Notification;No Lldp Notification

548 LLDP (802.1AB) Commands
no lldp transmit-tlv Use this command to remove an optional TLV from the LLDPDUs. Use the
command without parameters to remove all optional TLVs from the LLDPDU.
lldp transmit-mgmt Use this command to include transmission of the local system management
address information in the LLDPDUs. This command can be used to configure a
single interface or a range of interfaces.
no lldp transmit-
mgmt
Use this command to include transmission of the local system management
address information in the LLDPDUs. Use this command to cancel inclusion of
the management information in LLDPDUs.
lldp notification Use this command to enable remote data change notifications on an interface or a
range of interfaces.
no lldp notification Use this command to disable notifications.
Format
no lldp transmit-tlv [sys-desc] [sys-name] [sys-cap]
[port-desc]
Mode Interface Config
Format
lldp transmit-mgmt
Mode Interface Config
Format
no lldp transmit-mgmt
Mode Interface Config
Default disabled
Format
lldp notification
Mode Interface Config
Default disabled