NetApp CN1610 - Debug Transfer; No Debug Transfer; Show Debugging; No Show Debugging

262 Serviceability Packet Tracing Commands
debug transfer This command enables debugging for file transfers.
no debug transfer This command disables debugging for file transfers.
show debugging Use the
show debugging command to display enabled packet tracing
configurations.
The following shows example CLI display output for the command.
console# debug arp
Arp packet tracing enabled.
console# show debugging
Arp packet tracing enabled.
no show debugging Use the no show debugging command to disable packet tracing configurations.
packet transmit Turn on TACACS+ transmit packet debugs.
accounting Turn on TACACS+ authentication debugging.
authentication Turn on TACACS+ authorization debugging.
Parameter Description
Format
debug transfer
Mode Privileged EXEC
Format
no debug transfer
Mode Privileged EXEC
Format
show debugging
Mode Privileged EXEC
Format
no show debugging