NetApp CN1610 - Passwords Strength Minimum Numeric-Characters; No Passwords Strength Minimum Numeric-Characters; Passwords Strength Minimum Special-Characters; No Passwords Strength Minimum Special-Characters

Chapter 3: Management Commands 77
passwords strength
minimum numeric-
characters
Use this command to enforce a minimum number of numeric characters that a
password should contain. The valid range is 0-16. The default is 2. Minimum of 0
means no restriction on that set of characters.
no passwords
strength minimum
numeric-characters
Use this command to reset the minimum numeric characters required in a
password to the default value.
passwords strength
minimum special-
characters
Use this command to enforce a minimum number of special characters that a
password should contain. The valid range is 0-16. The default is 2. Minimum of 0
means no restriction on that set of characters.
no passwords
strength minimum
special-characters
Use this command to reset the minimum special characters required in a
password to the default value.
Default 2
Format
passwords strength minimum numeric-characters
Mode Global Config
Format
no passwords minimum numeric-characters
Mode Global Config
Default 2
Format
passwords strength minimum special-characters
Mode Global Config
Format
no passwords minimum special-characters
Mode Global Config