NetApp CN1610 - Show

180 System Information and Statistics Commands
show This command displays the content of text-based configuration files from the
CLI. The text-based configuration files (startup-config, backup-config and
factory-defaults) are saved compressed in flash. With this command, the files are
decompressed while displaying their content.
The following shows example CLI display output for the command using the
startup-config parameter.
(CN1610) #show startup-config
!Current Configuration:
!
!System Description "Quanta LB6M, 8.1.14.41, Linux 2.6.27.47, U-
Boot 2009.06 (Apr 19 2011 - 15:57:06)"
!System Software Version "8.1.14.41"
!System Up Time "0 days 0 hrs 48 mins 19 secs"
!Additional Packages BGP-4,QOS,IPv6,IPv6
Management,Routing,Data Center
!Current SNTP Synchronized Time: Not Synchronized
!
vlan database
vlan 10
exit
configure
ipv6 router ospf
exit
line console
exit
line telnet
exit
line ssh
exit
!
Format
show { startup-config | backup-config | factory-
defaults }
Mode Privileged EXEC
Parameter Description
startup-config Display the content of the startup-config file.
backup-config Display the content of the backup-config file.
factory-defaults Display the content of the factory-defaults file.