EasyManua.ls Logo

NetApp CN1610 - Show Policy-Map Interface; Show Service-Policy

NetApp CN1610
708 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
646 DiffServ Show Commands
show policy-map
interface
This command displays policy-oriented statistics information for the specified
interface and direction. The slot/port
parameter specifies a valid interface for the
system. Instead of slot/port
,
lag
lag-intf-num
can be used as an alternate way
to specify the LAG interface.
lag
lag-intf-num
can also be used to specify the
LAG interface where
lag-intf-num
is the LAG port number.
Note
This command is only allowed while the DiffServ administrative mode is
enabled.
The following information is repeated for each class instance within this policy:
show service-policy This command displays a summary of policy-oriented statistics information for
all interfaces in the specified direction.
Format
show policy-map interface slot/port
[in]
Mode Privileged EXEC
Term Definition
Interface slot/port
Direction The traffic direction of this interface service.
Operational Status The current operational status of this DiffServ
service interface.
Policy Name The name of the policy attached to the interface in
the indicated direction.
Term Definition
Class Name The name of this class instance.
In Discarded Packets A count of the packets discarded for this class
instance for any reason due to DiffServ treatment of
the traffic class.
Format
show service-policy in

Table of Contents

Other manuals for NetApp CN1610

Related product manuals