Chapter 5: Switching Commands 507
show arp access-
list
Use this command to display the configured ARP ACLs with the rules. Giving an
ARP ACL name as the argument will display only the rules in that ARP ACL.
The following shows example CLI display output for the command.
(CN1610) #show arp access-list
ARP access list H2
permit ip host 1.1.1.1 mac host 00:01:02:03:04:05
permit ip host 1.1.1.2 mac host 00:03:04:05:06:07
ARP access list H3
ARP access list H4
permit ip host 2.1.1.2 mac host 00:03:04:05:06:08
Format
show arp access-list [acl-name]
Mode ◆ Privileged EXEC
◆ User EXEC
To Next Page
Loading...
