Chapter 4: Utility Commands 277
sflow receiver
owner notimeout
Use this command to configure a receiver as a non-timeout entry. Unlike entries
configured with a specific timeout value, this command will be shown in show
running-config and retained after reboot. As the sFlow receiver is configured as a
non-timeout entry, information related to sampler and pollers will also be shown
in the running-config and will be retained after reboot.
If a receiver is configured with a specific value, these configurations will not be
shown in running-config. Samplers and pollers information related to this
receiver will also not be shown in running-config.
Receiver Owner The owner name corresponds to the receiver name.
The identity string for the receiver, the entity making
use of this sFlowRcvrTable entry. The range is 127
characters. The default is a null string. The empty
string indicates that the entry is currently unclaimed
and the receiver configuration is reset to the default
values. An entity wishing to claim an
sFlowRcvrTable entry must ensure that the entry is
unclaimed before trying to claim it. The entry is
claimed by setting the owner string to a non-null
value. The entry must be claimed before assigning a
receiver to a sampler or poller.
Field Description
Format
sflow receiver index owner owner-string notimeout
Mode Global Config
Field Description
index Receiver index identifier. The range is 1 to 8.
To Next Page
Loading...
